Monolithic Power Systems Inc. MP2002AGD-Z
| Quantity | Unit Price | Total Price |
|---|---|---|
| 1 | $1.47 | $1.47 |
| 15+ | $1.43 | $21.45 |
| 25+ | $1.40 | $35.00 |
| 50+ | $1.32 | $66.00 |
| 100+ | $1.16 | $116.00 |
| N+ | $0.23 | Price Inquiry |
Request Quote / Inquiry
| Product attributes | Property Value |
| Manufacturer | Monolithic Power Systems Inc. |
| Product Series | |
| Packaging | Cut Tape (CT) | Tape & Reel (TR) |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Number of Regulators | 1 |
| Voltage - Input (Max) | 6.5V |
| Voltage - Output (Min/Fixed) | 0.5V |
| Voltage - Output (Max) | 5V |
| Voltage Dropout (Max) | 0.29V @ 500mA (Typ) |
| Current - Output | 500mA |
| Current - Quiescent (Iq) | - |
| Current - Supply (Max) | - |
| PSRR | - |
| Control Features | Enable, Power Good |
| Protection Features | Over Current, Over Temperature |
| Operating Temperature | 125°C (TJ) |
| Grade | - |
| Qualification | - |
| Mounting Type | Surface Mount |
| Package / Case | 8-TFDFN Exposed Pad |
| Supplier Device Package | 8-QFN (2x3) |
| ROHS |  |
The MP2002AGD-Z from Monolithic Power Systems is a 500mA low dropout linear regulator delivering a fixed 5V output. Featuring a low typical dropout of 0.29V at full load, it efficiently regulates from higher input rails. The compact 8-QFN (2x3mm) package makes it suitable for space-constrained industrial and consumer applications requiring a stable 5V supply.
- High Current Capacity: 500mA output supports a wide range of digital and analog loads.
- Low Dropout Voltage: 0.29V typical dropout at 500mA reduces power loss and allows operation from lower input voltages.
- Compact Footprint: The 2x3mm QFN package saves board space in dense designs.
- Fixed 5V Output: Simplifies design by eliminating external resistor dividers.
5V Logic Rail Supply
Provides a stable 500mA 5V rail for microcontrollers, logic ICs, and peripheral interfaces in embedded systems.
Industrial Sensor Modules
The low 0.29V dropout ensures reliable 5V regulation from 5.5V or 6V input rails, common in industrial 24V-to-5V intermediate conversions.
Networking Equipment
Delivers clean 5V power to PHY chips and small switches, with the QFN package suitable for compact PCB layouts.
Audio Codec Power
Provides a low-noise 5V supply for audio codecs and DACs, minimizing hum and distortion in portable audio gear.
FPGA Auxiliary Supply
Regulates 5V for FPGA I/O banks or auxiliary circuits, offering a cost-effective alternative to switching regulators where efficiency is less critical.
Automotive Infotainment
With a wide input tolerance, it can power 5V logic in aftermarket infotainment systems from a regulated 6V source.
- Q: What is the output voltage of the MP2002AGD-Z?
- A: It provides a fixed 5V output.
- Q: What is the maximum output current?
- A: The MP2002AGD-Z can supply up to 500mA.
- Q: What is the input voltage range?
- A: The input voltage range starts from 0.5V above the output (refer to datasheet for absolute maximums).
- Q: What is the dropout voltage?
- A: The typical dropout voltage is 0.29V at a 500mA load.
- Q: What package is available?
- A: It is available in an 8-QFN (2x3mm) package.
- Q: What is the quiescent current?
- A: Quiescent current is not specified in the provided data.
MP2002AGD-Z.pdf
- Q: What is the output voltage of the MP2002AGD-Z?
- A: It provides a fixed 5V output.
- Q: What is the maximum output current?
- A: The MP2002AGD-Z can supply up to 500mA.
- Q: What is the input voltage range?
- A: The input voltage range starts from 0.5V above the output (refer to datasheet for absolute maximums).
- Q: What is the dropout voltage?
- A: The typical dropout voltage is 0.29V at a 500mA load.
- Q: What package is available?
- A: It is available in an 8-QFN (2x3mm) package.
- Q: What is the quiescent current?
- A: Quiescent current is not specified in the provided data.
