Rohm Semiconductor BU2JTD2WNVX-TL
| Quantity | Unit Price | Total Price |
|---|---|---|
| 1 | $0.68 | $0.68 |
| 15+ | $0.16 | $2.40 |
| 25+ | $0.15 | $3.75 |
| 50+ | $0.14 | $7.00 |
| 100+ | $0.13 | $13.00 |
| N+ | $0.03 | Price Inquiry |
Request Quote / Inquiry
| Product attributes | Property Value |
| Manufacturer | Rohm Semiconductor |
| Product Series | |
| Packaging | Tape & Reel (TR) | Cut Tape (CT) |
| Output Configuration | Positive |
| Output Type | Fixed |
| Number of Regulators | 1 |
| Voltage - Input (Max) | 6V |
| Voltage - Output (Min/Fixed) | 2.85V |
| Voltage - Output (Max) | - |
| Voltage Dropout (Max) | 0.5V @ 200mA |
| Current - Output | 200mA |
| Current - Quiescent (Iq) | 60 µA |
| Current - Supply (Max) | - |
| PSRR | 70dB (1kHz) |
| Control Features | Enable |
| Protection Features | Over Current, Over Temperature, Short Circuit |
| Operating Temperature | -40°C ~ 85°C |
| Grade | - |
| Qualification | - |
| Mounting Type | Surface Mount |
| Package / Case | 4-UDFN Exposed Pad |
| Supplier Device Package | SSON004X1010 |
| ROHS |  |
The BU2JTD2WNVX-TL from Rohm Semiconductor is a fixed 2.85V LDO regulator delivering 200mA with an ultra-low quiescent current of 60µA. Its 0.5V dropout at full load and 70dB PSRR at 1kHz make it an excellent choice for battery-powered and noise-sensitive applications. The miniature SSON004X1010 package enables high-density PCB designs.
- Ultra-low quiescent current (60µA): Prolongs battery life in always-on IoT and wearable devices.
- High PSRR (70dB @ 1kHz): Filters switching noise from DC-DC converters, ensuring clean analog supply.
- Low dropout (0.5V): Maximizes efficiency with near-end-of-life batteries.
- Ultra-compact SSON004X1010: Occupies minimal board space for miniaturized products.
Wearable Health Monitors
The 60µA quiescent current and 2.85V output are perfect for powering optical heart-rate sensors and Bluetooth SoCs in smartwatches, maximizing battery life between charges.
IoT Sensor Nodes
With 200mA capability and 70dB PSRR at 1kHz, this LDO provides clean power to RF transceivers and microcontrollers in wireless environmental sensors, reducing data corruption.
Hearing Aids and Audio Devices
The low dropout of 0.5V allows operation from a single 3V zinc-air battery, while the high PSRR suppresses digital noise from audio codecs.
Portable GPS Modules
Its stable 2.85V rail supports GPS receivers that require low-noise supply for accurate signal acquisition, even in dense urban environments.
Smart Card Readers
The compact SSON004X1010 package and 200mA output suit battery-operated card readers, providing a regulated supply for contactless ICs.
Medical Implantable Devices
Ultra-low quiescent current and small footprint make it suitable for pacemakers and neurostimulators where every microamp counts.
- Q: What is the output voltage?
- A: The BU2JTD2WNVX-TL provides a fixed 2.85V output.
- Q: What is the maximum output current?
- A: It can supply up to 200mA of output current.
- Q: What is the input voltage range?
- A: Input voltage must be above 2.85V plus dropout; typically 3.35V or higher for full load.
- Q: What is the dropout voltage?
- A: Dropout is 0.5V at 200mA load.
- Q: What is the quiescent current?
- A: Quiescent current is only 60µA, ideal for low-power devices.
- Q: What package is used?
- A: It comes in a compact SSON004X1010 package.
BU2JTD2WNVX-TL.pdf
- Q: What is the output voltage?
- A: The BU2JTD2WNVX-TL provides a fixed 2.85V output.
- Q: What is the maximum output current?
- A: It can supply up to 200mA of output current.
- Q: What is the input voltage range?
- A: Input voltage must be above 2.85V plus dropout; typically 3.35V or higher for full load.
- Q: What is the dropout voltage?
- A: Dropout is 0.5V at 200mA load.
- Q: What is the quiescent current?
- A: Quiescent current is only 60µA, ideal for low-power devices.
- Q: What package is used?
- A: It comes in a compact SSON004X1010 package.
