| Quantity | Unit Price | Total Price |
|---|---|---|
| 1 | $0.00 | $0.00 |
| 15+ | $0.00 | $0.00 |
| 25+ | $0.00 | $0.00 |
| 50+ | $0.00 | $0.00 |
| 100+ | $0.00 | $0.00 |
| N+ | $0.00 | Price Inquiry |
Request Quote / Inquiry
| Product attributes | Property Value |
| Manufacturer | Harris Corporation |
| Product Series | |
| Packaging | Bulk | |
| Part Status | Active |
| Logic Type | Transceiver, Non-Inverting |
| Number of Elements | 1 |
| Number of Bits per Element | 8 |
| Input Type | - |
| Output Type | 3-State |
| Current - Output High, Low | 8mA, 20mA |
| Voltage - Supply | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Grade | - |
| Qualification | - |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300", 7.62mm) |
| Supplier Device Package | 20-DIP (0.300", 7.62mm) |
The IP82C86H-5 from Harris Corporation is a single-channel non-inverting transceiver designed for 5V CMOS systems. It operates from a 4.5V to 5.5V supply and features 3-state outputs that can source 8mA and sink 20mA. This makes it ideal for bus-oriented applications where signal isolation and bidirectional data flow are required. The 20-pin DIP package and wide -40°C to 85°C temperature range make it suitable for industrial control and microprocessor interfacing.
- 3-State Outputs for Bus Sharing: Allows multiple devices to connect to a common bus without contention, simplifying system architecture.
- Wide Operating Temperature Range: Rated for -40°C to 85°C, suitable for industrial environments.
- CMOS Technology: Low power consumption compared to bipolar TTL, reducing heat generation and improving system efficiency.
- Non-Inverting Signal Path: Preserves signal polarity, simplifying logic design and reducing potential for errors.
Microprocessor Bus Interfacing
Interface a microprocessor to a bidirectional data bus. The 3-state output allows the transceiver to be isolated from the bus when not in use, preventing data contention and enabling multiple devices to share the same lines.
Memory System Buffering
Buffer address and data lines between a memory controller and DRAM/SRAM arrays. The non-inverting function preserves signal polarity, while the 3-state output allows for bank switching and efficient bus sharing.
Peripheral Device Isolation
Isolate peripheral devices from the main system bus during power-up or low-power modes. The 3-state output can place the peripheral in a high-impedance state, reducing leakage current and preventing bus conflicts.
5V TTL/CMOS Level Conversion
Convert between 5V TTL and 5V CMOS logic levels. The CMOS input thresholds and TTL-compatible output drive ensure reliable communication between different logic families operating at the same supply voltage.
Test and Measurement Equipment
Route test signals in automated test equipment. The 3-state output enables multiplexing of multiple signal sources to a single measurement point, controlled by digital enable signals.
- Q: What is the logic family of the IP82C86H-5?
- A: It is a CMOS logic device, operating from a 4.5V to 5.5V supply.
- Q: What is the function of this IC?
- A: It is a single-channel non-inverting transceiver with 3-state outputs.
- Q: How many channels does it have?
- A: It has 1 channel.
- Q: What is the output type?
- A: The output is 3-State, allowing the device to be disconnected from the bus (high-impedance state).
- Q: What is the operating voltage range?
- A: The recommended supply voltage is 4.5V to 5.5V.
- Q: What package is available?
- A: It comes in a 20-pin DIP (0.300", 7.62mm) package.
IP82C86H-5.pdf
- Q: What is the logic family of the IP82C86H-5?
- A: It is a CMOS logic device, operating from a 4.5V to 5.5V supply.
- Q: What is the function of this IC?
- A: It is a single-channel non-inverting transceiver with 3-state outputs.
- Q: How many channels does it have?
- A: It has 1 channel.
- Q: What is the output type?
- A: The output is 3-State, allowing the device to be disconnected from the bus (high-impedance state).
- Q: What is the operating voltage range?
- A: The recommended supply voltage is 4.5V to 5.5V.
- Q: What package is available?
- A: It comes in a 20-pin DIP (0.300", 7.62mm) package.