Micrel Inc. MIC29371-12BT

Skip to product information
1 of 1
Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
Regular price $5.08
Regular price $1.27 Sale price $5.08
Sale Sold out
Quantity Unit Price Total Price
1 $5.08 $5.08
15+ $1.17 $17.55
25+ $1.14 $28.50
50+ $1.08 $54.00
100+ $0.95 $95.00
N+ $0.19 Price Inquiry
Shipping calculated at checkout.
Quantity
Component Recycling

Request Quote / Inquiry

Product attributes Property Value
Manufacturer Micrel Inc.
Product Series
Packaging Bulk |
Output Configuration Positive
Output Type Fixed
Number of Regulators 1
Voltage - Input (Max) 26V
Voltage - Output (Min/Fixed) 12V
Voltage - Output (Max) -
Voltage Dropout (Max) 0.75V @ 750mA
Current - Output 750mA
Current - Quiescent (Iq) 300 µA
Current - Supply (Max) 25 mA
PSRR -
Control Features Enable, Error Flag
Protection Features Load Dump, Over Current, Over Temperature, Reverse Polarity, Transient Voltage
Operating Temperature -40°C ~ 125°C (TJ)
Grade -
Qualification -
Mounting Type Through Hole
Package / Case TO-220-5
Supplier Device Package TO-220-5

The MIC29371-12BT from Micrel is a fixed 12V LDO regulator capable of delivering 750mA. It features a dropout voltage of 0.75V at full load and a quiescent current of 300µA. The TO-220-5 package ensures excellent heat dissipation, making it suitable for industrial and automotive applications where reliability is critical. This regulator provides a stable 12V rail for a variety of power-hungry loads.

  • High Current Capacity: 750mA output supports a wide range of 12V loads, from sensors to small actuators.
  • Robust TO-220 Package: Excellent thermal performance for continuous operation in demanding environments.
  • Stable 12V Output: Provides a precise, fixed voltage for industrial and automotive systems.
  • Moderate Quiescent Current: 300µA is acceptable for always-on industrial applications.

Industrial Control Systems

The 12V output at 750mA is ideal for powering industrial sensors, PLCs, and control relays, where a stable 12V rail is required.

Telecommunications Equipment

Provides a clean 12V supply for line drivers, interface circuits, and small networking devices, with the TO-220 package handling thermal loads.

Audio Amplifier Pre-Regulation

The low noise characteristics of an LDO make it suitable for pre-regulating 12V audio circuits, reducing hum and interference.

Automotive Electronics

Can power 12V automotive accessories like sensors and small actuators, with the dropout voltage ensuring operation during battery voltage fluctuations.

Test and Measurement Instruments

Provides a stable 12V reference rail for benchtop instruments, ensuring accurate readings in multimeters and oscilloscopes.

LED Lighting Drivers

For low-power LED strips and indicators, this regulator can provide a constant 12V supply, ensuring consistent brightness.

Q: What is the output voltage of the MIC29371-12BT?
A: This LDO provides a fixed output voltage of 12V.
Q: What is the maximum output current?
A: It can deliver up to 750mA of continuous output current.
Q: What is the input voltage range?
A: The input voltage range is not explicitly listed, but the dropout voltage is 0.75V at 750mA, so input must be at least 0.75V above 12V.
Q: What is the dropout voltage?
A: The dropout voltage is 0.75V at full load (750mA), which is moderate for a 12V regulator.
Q: What is the quiescent current?
A: The quiescent current is 300µA, which is reasonable for a higher-voltage regulator.
Q: What package is available?
A: It is available in a TO-220-5 package, which provides excellent thermal performance for power applications.
Base Product Number : MIC29371
12V 750mA High Current LDO Linear Regulator MIC29371 Micrel TO-220-5
Q: What is the output voltage of the MIC29371-12BT?
A: This LDO provides a fixed output voltage of 12V.
Q: What is the maximum output current?
A: It can deliver up to 750mA of continuous output current.
Q: What is the input voltage range?
A: The input voltage range is not explicitly listed, but the dropout voltage is 0.75V at 750mA, so input must be at least 0.75V above 12V.
Q: What is the dropout voltage?
A: The dropout voltage is 0.75V at full load (750mA), which is moderate for a 12V regulator.
Q: What is the quiescent current?
A: The quiescent current is 300µA, which is reasonable for a higher-voltage regulator.
Q: What package is available?
A: It is available in a TO-220-5 package, which provides excellent thermal performance for power applications.